Home - News - Details

What Buyers Must Know:Switch Knowledge

The correct direction for opening and closing the wall switch

If it is a single control switch, there will be different wiring holes on the switch, and if there is a 0 symbol, it indicates that it should be close to the live wire, while 1 and 3 represent the wiring of the live wire. When we turn on or off the lights, there is actually a switch that can control the electrical appliances. Generally speaking, pressing up indicates the direction of turning on, and pressing down indicates the direction of turning off. Moreover, there are relevant signs on the wall switch. Some represent 'on', some represent 'off'. If not, there will be a small label or a small bump on it.

The correct direction for opening and closing the wall switch

If it is a single control switch, there will be different wiring holes on the switch, and if there is a 0 symbol, it indicates that it should be close to the live wire, while 1 and 3 represent the wiring of the live wire. When we turn on or off the lights, there is actually a switch that can control the electrical appliances. Generally speaking, pressing up indicates the direction of turning on, and pressing down indicates the direction of turning off. Moreover, there are relevant signs on the wall switch. Some represent 'on', some represent 'off'. If not, there will be a small label or a small bump on it.

If it is a dual control switch, the direction of the wall switch is not fixed, and it is possible to turn on the light up or down.

How to choose a wall switch

When choosing a wall switch, we first look at its casing, which is made of high-quality materials that have good impact resistance and high hardness. Some switch sockets also have flame-retardant properties, making them safer to use.

When choosing a wall switch, attention should also be paid to its contacts, because the better the contacts, the less likely they are to malfunction during use. The materials of the contacts are also different, such as pure silver and alloy. Generally speaking, alloy is relatively better, with better conductivity and less likely to rust during later use.

When choosing a wall switch, we also need to look at its power size, because the power of household appliances also varies. If the load is relatively high, it is best to choose a switch with a current of 16 amps or more, while general appliances can choose a 10 amp switch socket.

Although the switch on the wall is just a small item, the deployment of these objects is a crucial step in the process of decorating the house, and their installation is highly scientific. If not careful, it may cause unnecessary trouble. So, how can the switch be replaced if it burns out? Below, the editor will explain how to disassemble the wall switch, hoping to be helpful for your operation.

How to disassemble the wall switch

Firstly, it is necessary to turn on and off some switches and related equipment that need to be removed. Generally speaking, circuit breakers can control the entire room, but some residents may also use them to control a specific wall.

Although this step is relatively simple, if not done properly, it may cause some unnecessary trouble in the later stage. After opening the switch, use a screwdriver to remove the screws fixed on the cover plate, remove the cover plate and probe, and place them on the screw terminals of each switch to ensure that there is no force to switch.

Although tightening screws is just a simple operation, without skills, it is very easy to damage the screw. To do this, prepare a second step and then use a Phillips screwdriver to unscrew the switch and junction box, so that the remover can easily access the switch on the side of the wire end.

Loosen the fastening screws with a screwdriver, pull the wire to remotely switch it, and then pull it away from the wall, so that the switch can be removed

Send Inquiry

You Might Also Like