Material quality of wall switches
Leave a message
Panel Material:
The materials used in the panel of qualified switch sockets have reached national standards in terms of flame retardancy, insulation, impact resistance and other technical indicators, and the material stability of high-quality brand products is stronger. In the switch socket, most of them are used to make panels, bezels and shells, and a small number of brands even use PC material for the rear seat. High-quality brand switch sockets are usually imported high-grade PC materials.
Urea resin, also known as urea-formaldehyde resin, UF, its compression molding powder is commonly known as electric jade powder. It is the main material for domestic production of switch sockets before the 90s of last century. Compared with the use of high-grade PC materials, the insulation material used as an electrical product has poor impact resistance, wear resistance, insulation performance and high temperature resistance, and is easy to change color, and the surface is very rough when touched. It is a material most used by medium and low-grade brands, mostly used to make switches and socket panels.

ABS, for propylene-butadiene-styrene terpolymer, is a general-purpose engineering plastic with a variety of varieties and a wide range of uses, also known as "general plastic". However, many low-grade, ultra-low-grade switch and socket products still use ABS to make panels, frames and fixed mechanisms, and it is not clear that it is ABS, only called high-grade engineering plastics. High-grade PC materials are also used in the back seat of high-end products. The contact first depends on the size, of course, the larger the better, and the moving contact, static contact size and material should be consistent. The contacts used in brand switches are pure silver and silver alloy. After repeated switching, the contact area between the contacts will be reduced, the contact resistance will increase, the energization capacity will decrease and it is easy to heat up until the entire switch is completely burned out.
Whether the socket is good or not depends on the socket, and the key to the quality of the socket depends on the material and treatment process. A good sleeve is made of tin-phosphor bronze (color purple red). Tin phosphor bronze sheet has good elasticity, fatigue resistance, not easy to oxidize, especially after pickling phosphating oxidation treatment, the conductivity is more stable. The socket of high-quality socket should be made of high-quality tin phosphor bronze in an integrated process, no rivet point, low resistance, not easy to heat, safer and durable, the number of plugs and unplugs can reach 10,000 times, and the high-grade can reach 15,000 times.
There are also brass sheets used as socket sockets, because of the poor elasticity of brass, easy to oxidize, short-term use will be due to poor contact, easy to produce arc, heat, there is a hidden danger of fire accidents. Switch socket belongs to the national compulsory implementation of 3C certification electrical products, in line with national standards and pass the national 3C certification of products to ensure the safety of use.







