Attention to the installation of the socket

1. The installation height of the socket, when the design has regulations, should be installed according to the design requirements; When the design is not clear, it should generally meet: the socket with the safety door is not less than 0.3M; the socket without the safety door is not low and 1.8M. It is advisable to buy sockets with safety gates whenever possible, since the price difference between the two is not much.

2. In the toilet or other humid place, a well-sealed waterproof and splash-proof socket should be used. (Note: The socket with the safety door is a plastic baffle (safety gate) in front of the jack metal reed added to the general socket.) Three-hole socket, when the plug is inserted, the ground pile head (slightly longer) is inserted into the hole first, the mechanism in the socket action side opens the other two hole doors, the two-hole socket must be inserted into the socket pile head at the same time, and the safety door can be opened to prevent young children from accidentally inserting metal objects into the safety accident. )

3. When the socket is installed, its panel should be upright and close to the wall. And the wiring (phase) should conform to: single-phase two-hole socket, facing the right hole or upper hole of the socket phase line (live wire), left hole or lower hole connected to zero wire; Single-phase three-hole socket, facing the right hole phase line (L, live wire) of the socket, the left hole is connected to the neutral wire (N), and the upper hole ground wire (PE).